Quality Manipulators Now Available at Our E-commerce Store

If it has been a while since you last visited Micromanipulator’s website, you may be unaware that we now have an e-commerce store that makes it easier than ever for our customers to buy their consumable and accessory products.  Along with probe tips, probe holders, and other products, you will find a wide selection of our quality manipulators.

All of our manipulators including our most economical models feature direct leadscrew-leadnut drives, ergonomic design and the highest stability available in the marketplace.  The 110 and 210 models are a mini-arc style with a resolution of 32 threads per inch (TPI) = 2.2 µm and a 10 mm 10 mm (0.4”) max travel along each axis.   The 450 and 550 models, also a mini-arc style, have a resolution of 100 TPI =0.7 µm (450/550) and a 6.4 mm (0.25”) max travel for each axis.   

Our e-commerce store additionally offers manipulators in a recti-linear style design with models 525 and 2525.  The 525 has a resolution of 100 TPI =0.7 µm and 200 TPI =0.35 µm for the 2525.  Both manipulators have a 12.7mm (0.5”) maximum travel along each axis. 

Currently Micromanipulator’s online store does not offer our “Wave” series manipulators but it is still available and can be purchased directly from us.  Our Wave manipulators feature X-Y and Z leadscrew-leadnut control plus theta and planarity controls for alignment of microwave, multi-probe, or mini-probe cards (such as Celadon’s “Versa Tile”).  The theta and planarity is provided through PLF and PLS Link arms that are purchased separately. 

Please visit our website for more information regarding our products as well as to order your consumable and accessory products at our e-commerce store.  If you have any questions, please give us a call.    

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  We invite you to contact us to find out more about our wide range of probe stations, accessories and consumables.        

Outfit Your Probe Station with the Finest Consumables

Not only will you find high-quality probe stations at the Micromanipulator Company but we make it easy to increase your efficiency by outfitting it with a reliable needle probe from our large assortment of over 90 different versions.  Our needle probes are designed for a broad range of applications including general probing; high power; low current; high frequency, compliant, thermal applications; sub-micron targets; delicate target or surface; cutting and much more.  From high volume production support to high value critical FA return and everything in between, we have the best tip.   

Designed and manufactured at our U.S. headquarters, Micromanipulator’s disposable needle probes offer system users the advantage of quick replacement and eliminates the downtime associated with the need to re-sharpen.  Among our inventory, we offer designs made with nickel, or tungsten shanks and tungsten tips that are ideal for most probing applications.  

Also our wide selection of fine tips includes disposable tips for small targets that have a ‘C’ bend as well as a bendable nickel or Durmet shank cat-whisker.  Moreover we will customize a special probe tip for a nominal setup charge if you do not have what you need.   

For system users who prefer to use a probe holder with a built-in tip, we recommend our popular Model 44 that is engineered for high frequency and low level signal testing, and has so many options it is almost a custom probe.  Along with being economical, the probe is perfect for the most common microwave tests and offers a frequency range from DC to 3 GHz. 

When you buy from Micromanipulator, you are getting state-of-the-art products that have been expertly engineered to meet measurement equipment interface requirements as well tools that meet your personal preferences and budget.  Please visit our website to learn more our products, warranties and life-cycle support. 

Micromanipulator not only invented analytical probing in 1956 but we are the leading name in the field. We reliably deliver the tools and life cycle support the semiconductor industry depends on. Part of our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. We offer the most comprehensive range of probe stations on the market today as well the consumables, accessories and on-site support you require.        

Our Economy Probe Stations are a Great Buy!

While we are committed to providing our customers with the best products on the market, we are also mindful that budgetary concerns may factor into your decision.  This is why Micromanipulator is just as proud of our most economical probe stations as we are of our top-of-the-line models.  Since our reputation is built on providing the semiconductor industry with the most dependable tools, when you buy one of our economy models; you have our word you are still getting the performance and reliability we are known for.   

Frequently an application does not require all of the features and high-performance we offer in more expensive models and it just makes sense to take a look at our line of economy probe stations.  One example is the 450PM (150-200mm) Manual Analytical 8” probe station that provides users with a low purchase price and low cost of ownership. 

Offering a stable, reliable probing performance, the popular 450PM design is based on the Model 4060 and offers extensive application coverage, comes with comprehensive accessory support and and is hot chuck compatible (field upgradeable).  With an ergonomic, compact design, it offers an efficient use of lab space as well as increases stability and ease of use.  Features include manual lead screw control of the stage that helps to ensure its long life and stable, quick positioning.     

Currently our inventory of used probe stations includes a Model 450PM that offer an even better bargain.  Many of our used products were used to conduct demonstration or are from our product upgrade and trade-in programs.  Moreover along with the great price for such a quality prober, all of our used tools come with a factory warranty and support just like our new products.   We invite you to visit our website to learn more about our extensive line of probe stations designed to meet your application and budget needs. 

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of the company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to find out more about our exceptional line of probe stations and accessories.        

Wafer Chucks with the Broadest Temperature Range on the Market

The Micromanipulator Company has a reputation throughout the world for innovation and high-quality products.  Our customers feel confident purchasing from us as they know we stand behind our products and will still be around for many years in the future to help out with any problems.   

Our team proudly provides the semiconductor industry with the state-of-the-art products it needs in order to develop the products of tomorrow.  By listening and learning from our customers, Micromanipulator’s probe stations as well as our accessories and consumables are the products system users trust to serve their needs.   

One product that is a perfect example of our innovative thinking is Micromanipulator’s advanced thermal wafer chuck systems.  Regardless of which one of our probe stations you purchase, our wafer chucks are designed as part of the comprehensive system integration with features that include a rapid heating up and cooling down.  Our thermal chucks minimize expansion into the probes and heat radiation into the stage to help prolong the prober life.  Micromanipulator’s chucks also maintain incredible planarity over temperature changes with our Frictionless Kinematic Mount.   

Designed to support wafer testing from -65 to 400 degrees, our wafer chuck systems have a choice of AC and DC heating power supply.  If you do not require chuck noise in the femtoamp level and need fast heating, our recommendation is to go with an AC heating supply.  The DC power supply is for applications that need to achieve the lowest level measurements.  Furthermor, Micromanipulator’s quality hot chucks are designed to support 150 to 300 mm wafers in either coaxial or triaxial configurations. 

For the best planarity, lowest noise and lowest cost of ownership, we proudly offer our customers the exclusive H1000 series thermal chuck.  Along with having several configurations to meet your application and budget needs, all control options will work with our specialized thermal chuck.  From our most economical C1000 simple heat exchange (HE) option for above ambient testing to our high performance HC1000 system that can handle testing for temperatures as low as -65 degrees C., Micromanipulator has it.  Please see our website for more information.   

At Micromanipulator, we not only invented analytical probing in 1956 but are still the top name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  A key part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to learn more about our excellent range of probe stations and accessories. 

The Perfect Tools for C-V Measurements

Micromanipulator provides a series of Application Notes to troubleshoot problems and discuss products as well as to go further in-depth on probing applications such as C-V, or Capacitance-Voltage measurement.  C-V is a probing technique that varies the voltage in order to measure the capacitance.  Historically C-V has been used to detect mobile ion contamination in oxide, which takes the form of sodium ions.  Since we know sodium is extremely mobile and can migrate within the device structure, often devices that had passed the final test in the factory, failed in the field.   

As industry leaders, Micromanipulator has developed a solution that provides a highly accurate test environment for C-V measurements with our 8060 (150-200mm) High Performance Manual Probe Station.  Offering the highest performance available in a 6 – 8” (150 – 200mm) manual analytical probe station, the 8060 is designed for ease of use in demanding applications.  Some of these include very low current and voltage probing, high and low temperature probing, and sub-micron target probing to the limits of visible optics. 

Furthermore, it can be configured with an integrated environment that supports dark – shielded – dry probing.  When you take into account the price-performance, high efficiency features and low cost of ownership, the 8060 probe station provides system users with a cost-effective solution for high performance analytical probing. 

Micromanipulator also manufactures the H1000 Thermal System that offers a single chuck with a temperature range of -65° C to 400° C.    In addition we have a standard LTE (light tight enclosure) that rests on the anti-vibration isolation and completely encompasses the test station or an integrated shielded environment.  Please visit our website or contact our engineers to learn more about our products and which ones are best suited for C-V measurement testing.  

Micromanipulator not only invented analytical probing in 1956 but we are leaders in the field and reliably deliver the tools and life cycle support the semi-conductor industry depends on. Our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. For one of the most comprehensive selections of probe stations, consumables and accessories on the market, please see our website.           

The Industry’s Best Probe Stations Fit Your Budget & Application Needs

At Micromanipulator we pride ourselves on the fact that by designing, engineering and manufacturing such a wide range of probe stations, our customers can find exceptional products that meet their budget and application needs.  Along with our probe stations, we also offer a selection of high-quality accessories including thermal chucks, probe card holders, manipulators, vibration isolation tables, and more.    

Starting with one of our newest products, Micromanipulator’s recently introduced another industry first, the patented 2210-LS Application Board Probe Station.  With above/below ambient temperature stress that addresses today’s advanced system level FA challenges, the 2210-LS allows users to quickly trace and analyze issues in the actual end application environment easier and faster.    

For our budget-conscience customers or those who do not require the advanced features of the application board prober, we have many economical probe stations.  These include our line of general purpose manual probe stations that meet the needs of most applications and  offer a low purchase price and low cost of ownership. Moreover our general purpose manual probers are hot chuck compatible and field upgradeable and come with comprehensive support.  

We also want to mention the great deals available with our used probe stations.  Many of these tools were used for demonstration purposes or are from our active product upgrade and trade-in programs.  Currently our inventory of used products includes the P300J, P300A, 4060, and the 450PM but if you need something else, give us a call as we may be able to help.  As with all of our probe stations and accessories, our used tools come with a factory warranty and support.

Remember whether you decide on one of our Semi-Automatic, High Performance Manual, General Purpose Manual, a used model or the 2210 System Level prober, Micromanipulator stands behind all of our products.  Please visit our website to learn more.   

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  We invite you to contact us to find out more about our wide range of probe stations, accessories and consumables.        

Why Trust Micromanipulator for Your Testing Needs?

There are not many companies that have been in business for as long as Micromanipulator (over 60 years), and you may be wondering what our secret is and why we have enjoyed continued success unlike many of our competitors.  Once you know more about our company, you will recognize that three things have set us apart from the competition – our technology, products and focus on customer service and support.   

In terms of our technology, Micromanipulator not only sets the bar high but has an exceptional, experienced team to deliver on it.  With the invention of analytical probing in 1956, we have since produced many industry’s firsts such as pioneering the integration of thermal chucks with probe stations.  Even today, we continued to lead the industry with the broadest available temperature range and the most advanced, non-operator dependent performance available on the market.  Our system approach removes the “burden of performance” on users and allows them to focus on the data, not the prober and includes vibration isolation, thermal management, materials selections and flexible, open architectures.   

Furthermore, with our broad selection of manual, motorized, or semi-automatic probers, users can easily choose a probe station that best meets their needs.  We also have an extensive range of accessories including our exclusive H1000 series thermal wafer chuck that offer the best planarity, lowest noise and the lowest cost of ownership.   Micromanipulator’s other options include microscopes, vibration isolation, light and noise shields, manipulators, and DC and RF measurement hardware. 

Although while we know that our exceptional products and advanced technology have been critical to our success, we think the most important step Micromanipulator has taken from the start is to listen and learn from our customers.  Our professional services include a worldwide network of service support engineers for full system level support on everything from optics to thermal chucks.  Also to protect your investment, we offer extended warranties, preventative maintenance programs and upgrade paths even for obsolete tools. 

 Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  We invite you to contact us to find out more about our wide range of probe stations, accessories and consumables.         

One of the World’s Top Test Probe Manufacturers

Headquartered in Carson City, NV, the Micromanipulator Company has been in the industry for over 60 years and is now one of the world’s leading manufacturers of pre and post tape out wafer, package,and system level analytical probing tools.  Our equipment is used by test labs around the world for design verification, device modeling and characterization, design and market FA, process verification, and quality control.  

Regardless of your location, you will find that our products are readily available as we have sales offices and representatives on every major continent.  Furthermore, unlike many test probe manufacturers, Micromanipulator is pleased to offer our customers upgrade paths even for obsolete tools.  We also have extended warranties and preventive maintenance programs that are designed to protect your investment, and with our worldwide presence, we can provide you with full support services. 

Micromanipulator’s extensive line of probe stations is one of the best on the market with a range of models suited to virtually any application and any budget.  A frequent choice for cost-conscience customers is our Model 450PM 8” probe station that offers a great value with its low cost of ownership along with its stable, reliable probing performance.  The design of the 450PM is based on our popular Model 4060 probe station that offers users extensive application coverage and flexible options. 

Another reason we have maintained our leadership role in the industry is Micromanipulator’s “Full Life-Cycle Support.”  Starting with solutions engineering, followed by state-of-the-art manufacturing and continuing right through to expert on-site support and maintenance, we provide customers with the tools they need to achieve their success.   

To get a better idea of the wide range of our probe stations as well as consumables and accessories, please visit our website.  Also if you haven’t visited our website in a while, you may be unaware of our convenient online store where you can easily buy probe holders, manipulators, probe tips and patch cords 24/7 from anywhere in the world. 

At Micromanipulator, we not only invented analytical probing in 1956 but are still the top name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  A key part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to learn more about our excellent range of probe stations and accessories. 

Demo Our Exclusive 2210-LS Application Board Probe Station

Micromanipulator is pleased to be able to offer our customers a chance to demo the world’s first true system level probe station with above and below ambient temperature capabilities.  In partnership with TEC Associates, we have setup a demonstration hub to provide interested customers the opportunity to evaluate the performance and capabilities of our tools including our 2210-LS in a real world setting. 

Our California Demonstration Facility is located in Fremont California and is just minutes away from the San Jose International Airport and the Bay Area.  During your scheduled private demo, we encourage you to bring your devices and measurement hardware to verify our products with actual devices.   

As one of our first products at the testing facility, the patented 2210-LS Application Board probe station was specifically designed to assist development teams working with post tape-out product spins.  Use of application boards for system level testing can significantly expedite the failure analysis operation.  It allows you to probe at the application board block or system level while exercising your chip in mission mode.  Furthermore, the 2210-LS allows you to trace and analyze issues that manifest only in the actual end application environment faster and easier than ever before.   

Please contact TEC Associates, our exclusive sales representative in Northern California, or visit Micromanipulator’s website for contact information to schedule a demo appointment.  The cost of test and setup are controlled with flexibility to test different systems on one platform.  While at our website, we invite you to take a look at our extensive line of probe stations, consumables and accessories.  Also remember that Micromanipulator now has an online store that conveniently sells our probe holders, probe tips, manipulators/probe positioners and patch cords. 

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  We invite you to contact us to find out more about our wide range of probe stations, accessories and consumables.        

Compare Our High Performance Manual Probe Station

At Micromanipulator we work closely with our customers to design, engineer and manufacture the tools they need to meet their application requirements, personal preferences and budget.  As we offer one of the most comprehensive selections of probe stations on the market, we recognize that it can be confusing to know which of our probers is best suited for your needs.  This is why we make sure to provide an abundant amount of information and specifications for each of our models.  In addition we provide customers with a detailed comparison chart of all of our High Performance Manual probe stations.    

The chart compares Micromanipulator’s 450PM, 450PM-MW, and 450PM-HR as well as the 4060 and 8060 by: Model, Wafer Size, Control, Accessory, Options, Upgrade Path, Target Application and the Value.  For instance, you will see that the 4060 model is designed for 4-6-8” wafer sizes, is a manual control prober, has accessory options that include Hot Chuck, Cold Chuck, LTE (Light Tight Enclosure), Probe Card, and Laser/ Micrometer.   

The target applications for the Model 4060 includes: General Purpose, RF / DC, Failure Analysis, Reliability, and General device characterization.  The chart also shows you the value of the 4060 and that it is offered at a good price for its performance.  Available at a medium acquisition cost, the probe station offers system users good application coverage and good COO for general purpose applications.    

We encourage you to visit our website to compare each of our High Performance Manual probe stations so you may easily figure out which one best meets your needs.  While you are on our site, please take a look at our high-quality probe holders, probe tips and manipulators that can now be conveniently ordered through our new online store.   

Micromanipulator not only invented analytical probing in 1956 but we are leaders in the field and reliably deliver the tools and life cycle support the semi-conductor industry depends on. Our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. For one of the most comprehensive selections of probe stations, consumables and accessories on the market, please see our website.           

The Market’s Best Semi-Automatic Probe Station

If you are looking for one of the industry’s most stable and intuitive probe stations, we invite you to take a look at Micromanipulator’s semi-automatic probers.  Our P200L (200mm), P200A (200mm), P300L (300mm), and P300A (300mm) Semi-automatic state-of-the-art probe stations offer space efficiency with their compact design and are suitable for a wide range of testing applications.  They also have comprehensive accessory support and are field upgradeable for hot and cold thermal chucks.  

The low current-ready P200L (200mm) and P300L (300mm) has a high stability machined base as well as a microscope bridge designed for small target probing.  It supports all high resolution microscopes.  Also in addition to its durable and attractive finish, the probe station’s stainless steel platen supports vacuum or magnetic base manipulators.   

A removable front wedge provides additional room for manipulators as well as an entry port when configured with a local dry/dark environment.  The P200L and P300L feature standard leadscrew / leadnut stage and platen drives that provide high precision in addition to a long life as it distributes the drive force over a large contact area.  The stage X-Y and platen (Z) are motorized and programmable, and a motorized and programmable control is also available for a microscope. The probe stations can be configured with a local dry / shielded / dark environment and “Top Hat” for low level or low temperature probing. 

The P200A and the P300A are the highest performing 200mm and 300mm semiautomatic probe stations on the market today and are designed for low current, sub-micron positioning applications.  Built for reliability and precision, the probe stations feature closed-loop operation with massive stage and platen drives, a robust chuck mount and a harmonic theta drive.  

In addition Micromanipulator offers a broad range of quality consumables, accessories and options for our systems including thermal wafer chucks, probe holders and probe tips, manual/motorized manipulators, light tight enclosures, microscopes, DC and RF measurement hardware, and more.  Please visit our website or contact us to learn more about putting together a system to meet your specific application needs.  

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  We invite you to contact us to find out more about our wide range of probe stations, accessories and consumables.        

Products Designed to Meet the Needs of Virtually Any Application

Since Micromanipulator offers one of the widest ranges of probe stations on the market, they are designed to meet virtually every application need from low current to high speed testing.  As industry leaders, our vast areas of expertise includes: Failure analysis; Low current / low noise measurement; High and low temperature characterization; Device reliability analysis – Interconnect; ESD wafer level testing; Device reliability analysis – Interconnect, EM, HCI, Charge Pumping, NBTI, PBTI, TDDB; C-V measurements; High speed digital analysis and more.  

We invite you to visit our website and to browse through our extensive selection of probe stations that have been designed, engineered and manufactured to meet our customers’ needs.  Also be sure to take a look at our well-designed consumables and accessories that allows you to outfit your prober to meet not only your application needs but your budget and personal preferences.  Micromanipulator’s selection of probe stations includes Specialty, Semi-automatic, High-performance Manual and General-purpose Manual.   

One excellent example of both the quality and economy of Micromanipulator’s probe stations is the popular 450PM-MW (150-200mm) General Purpose Manual model.  Offering a low purchase price as well as a low cost of ownership, the 450PM’s stable, reliable probing performance has made it the probe station of choice for test labs around the world.   

Headquartered in Carson City, NV, we have been an industry leader for more than 60 years and attribute our success to listening and learning from our customers.  Furthermore, we recently launched an e-commerce store due to customer demand, which offers an assortment of our probe holders, probe tips, manipulators/probe positioners and patch cords.  Also if you would like to request a quote on one of our probe stations or other products, please use our convenient online request form.   

At Micromanipulator, we not only invented analytical probing in 1956 but are still the top name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  A key part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to learn more about our excellent range of probe stations and accessories. 

The Semiconductor Industry’s Most Trusted Global Provider

Micromanipulator is the leading provider of the tools required by the semiconductor industry and we proudly serve countries throughout Asia, Europe, the Middle East and South America.  Our worldwide presence means our customers are not only able to buy the  finest selection of probe stations, accessories and consumables on the market but to also get full life cycle support regardless of where they live.  Our high-quality products are used in applications that range from failure analysis and Wafer Level Reliability (WLR), new device test and characterization, yield enhancement, to application board level testing.    

One example of the benefits of partnering with companies worldwide is HTT, our Sales and Service representative in Central Europe, Eastern Europe and Scandinavia.  HTT’s commitment to quality customer support and service is in-line with Micromanipulator’s core values and their strong technical background provides the high level of support our customers have come to expect and deserve. 

In addition, you may be unaware that Micromanipulator has opened an ecommerce store that sells a range of products including our most requested probe tips, probes holders, manipulators/probe positioners and patch cords.  This is especially convenient for our global customers as we allow you to safely and securely buy these products whenever you need regardless of the time zone you reside in.   

Be sure to check out our website for a list of contact information and links to our trusted global representatives that are ready to help you buy products for your probing needs.  In addition our worldwide network of service support engineers provides the support you need to keep your entire system running from optics to thermal chucks.  Please contact Micromanipulator’s U.S. headquarters if you need more information on how to buy our products globally. 

At Micromanipulator, we not only invented analytical probing in 1956 but are still the top name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  A key part of our company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to learn more about our excellent range of probe stations and accessories. 

Need a Really High Frequency Probe Holder?

One look at our website and you will see that Micromanipulator offers high frequency probe holders for ranges greater than 3 GHz (or microwave) as well as low for capacitive loading or high input impedance.  As a distributor of the Picoprobe® series, our selection of probe holders include the Model PP40A that offers a frequency range of DC to 40GHz right through to the highest frequency range of 220GHz to 325GHz available from the Model PP325 WR3.  All of our microwave probe heads require the WAVE100 or WAVE200 RF/Microwave style manipulator along with the use of the appropriate probe link arms (PLS or PLF) and cables. 

One of our popular models is the PP120 WR10 that offers a high frequency range from 75 to 100 GHz.  Specifications include an insertion loss of 1.75 db max (75 to 110 GHz) and a return loss of 15 db max (75 to 110 GHz).  The measurement repeatability is 50 db and is available with or without a bias T.    

Another option is our PP220 WR5 that has a frequency range from 140 to 220GHz.  The probe holder has an insertion loss of 2.0 dB typ and a return loss of 15 dB typ.  It too is available with or without the bias T.   

If you just require a DC to 3 GHz range, we recommend you consider our popular fixed-tip and economical Model 44RF that is perfect for the most common microwave tests.  The probe holder has been designed for testing ground and signal contacts on high frequency hybrid and integrated circuits.  With Kelvin force and sense and single wire configurations, the Model 44 is available at our online store.  For more information regarding our very high frequency probe holders, please visit our website to take a look at our Probe Tip and Probe Holder Reference Manual or give one of our engineers a call.   

Micromanipulator not only invented analytical probing in 1956 but we are leaders in the field and reliably deliver the tools and life cycle support the semi-conductor industry depends on. Our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. For one of the most comprehensive selections of probe stations, consumables and accessories on the market, please see our website.           

“Systems Approach” to Integration

Micromanipulator’s advanced technology includes taking a “systems approach” to thermal management; vibration isolation; flexible and, open architectures; as well as offering a wide selection of materials.  Our company got its start in 1956 by pioneering many of the advancements in the semi conductor industry, and now more than 60 years later, we are proud to say we are still leading the way.   

 Along with our broad range of probe stations designed to meet the needs of virtually any application, we design, engineer and manufacture a line of exceptional accessories.  All of these products seamlessly integrate with our probe stations and include high-quality microscopes, vibration isolation, thermal chucks, light and noise shields, and manipulators along with DC and RF measurement hardware. 

One example of our accessories is the Light Tight Enclosure (LTE) with Vibration Isolation Table.  It offers the benefit of allowing the probe station be supported on the vibration isolated surface and the light tight enclosure to be mounted on the rigid surface of the table’s guard rails.  Our well-designed product does not disturb the floating vibration isolated surface when the LTE doors are opened as with other such systems.    In addition ours is easy to install and allows for easy removal of the probe station.  

In terms of our manipulators/probe positioners, our selection provides the highest stability available and is designed to meet your application needs as well as personal preference and budget.  All of our manipulators feature direct leadscrew / lead nut drives and ergonomic designs, and range from our economy Model 110 manipulator to the multi-versatile WAVE manipulator.

To guarantee customer success with all of our various high-tech tools, we offer Micromanipulator’s exclusive Full Life-Cycle Support worldwide.   Along with onsite support, our team of engineers is available to answer questions about our probe stations and accessories and will help you get the best products for your needs. 

Micromanipulator not only invented analytical probing in 1956 but we remain the leading name in the field.  As such we reliably deliver the tools and life cycle support the semiconductor industry depends on.  As part of the company’s philosophy and what drives our success is an unfaltering commitment to customers’ satisfaction.  Please contact us to find out more about our exceptional line of probe stations and accessories.        

Answers to FAQs Regarding Probe Tips & Probe Holders

Micromanipulator’s philosophy and the driving force behind our success is our strong commitment to customer satisfaction.  We strive to provide customers with all the information they need to purchase the most appropriate tools for their needs.  To achieve this goal, our website is filled with detailed specifications regarding our probe stations, accessories, and consumables along with application notes and reference manuals.   

In our Probe Tips and Probe Holders Reference Manual, we provide customers with information regarding the elements of a probe and how to clean both probe tips and holders along with a full description of these products and their recommended uses.  The manual also provides answers to a few frequently asked questions about our probe tips and holders. 

In one example, we explain to a system user who requires a uniquely shaped probe holder in order to satisfy a complicated arrangement is to purchase one of our malleable (bendable) holders.  A great choice is our Model 72 that can be shaped and reshaped as desired.  If you need a more exact configuration, we also offer custom probe holders. 

The manual addresses the issue of using a probe holder with a built-in tip as we understand that many system users who are doing high frequency, low level signal testing or cutting prefer this style.  If this is case, may we recommend our low cost Model 44 that has a frequency range from DC to 3 GHz and is ideally suited for the most common microwave tests.   

Another commonly asked question we have had in the past is how to order one of our high-quality probe tips or probe holders?  We are pleased to report that we recently  launched an ecommerce store and now sell our probe holders, probe tips, probe positioners/manipulators and patch cords conveniently online.   Please visit our website to learn more. 

   

Micromanipulator not only invented analytical probing in 1956 but we reliably deliver the tools and life cycle support the semiconductor industry depends on.  Part of our company’s philosophy and what drives our success is an unfaltering commitment to customer satisfaction. Along with offering one of the best selections of probe stations on the market today, we also have all of the consumables, accessories and on-site support you need.        

Need a Customizable Probe Tip?

If you have not visited the Micromanipulator website in a while, you may be unaware that you can now order a variety of products at any time through our convenient online store.  One of the products you may be interested in is our high-quality customizable probe tips in the 7B Series as well as the overall shorter length of the 7G Series.  

Our 7B Series has a Tungsten tip for general purpose probing along with a bendable shank and tip.  We offer a choice of point radiuses from 1.0um point taper length, all the way to a 200.0um point taper length.  The tips come 10 per box and we have gold plated tungsten and tungsten versions available. We include a description of each tip such as the 50G, which has a tip diameter prior to sharpening: .020” Point radius: 50.0um Point taper length: .080” Included angle: 11-deg Overall length: 1.4".  The tip can be trimmed as needed.  The shank diameter is .020” and available in gold plated Tungsten.  

Micromanipulator’s customizable 7G Series tips are also for general purpose probing and offer a bendable shank and tip.  As stated it is just like the 7B Series but with a shorter overall length.  It also comes 10 tips to a box with a choice of point radius from 1.0um point taper length to 200.0um point taper length and in gold plating variations.  On our website you will find a detailed diagram of the 7B and the 7G that shows the various parts of the tip. 

If you do not need to customize a point radius or need gold plating, check out our great selection of standard probe tips now available at our online store.  Visit our website to learn more.    

Micromanipulator not only invented analytical probing in 1956 but we are the leading name in the field. We reliably deliver the tools and life cycle support the semiconductor industry depends on. Part of our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. We offer one of the mostcomprehensive selections of probe stations on the market today as well the consumables, accessories and on-site support you require.